This is my baby. I built
the car 8 years ago. It has a 30 over 360 "366" that I built and put 40
plus hours of porting and polishing into the heads that I had opened up
to 2.02 1.60 valves. I dyno'ed the motor and it made 424hp and 421
ft.lbs of torque. I run a 8 3/4 with 3.91's in the rear, I mini-tubbed
the car moving the springs in 3inches with the spring re-locater kit
from mopar and adding a 3" piece to the existing wheel well. It has
15x10's in the rear with 26x12.5 Mickey Thompson's with all that going
through a 3500 Hughes converter it runs pretty good.
Related Chrysler,
Dodge, Plymouth and Mopar Stuff:
Search The Mopars
Of The Month Site:
We are always
looking for Mopars to add to 440'S Mopars Of The Month. To
participate you must own a Mopar of some kind. (Dodge, Chrysler,
Plymouth, Desoto, Amc, Jeep, Dodge Truck, etc.) It can be your daily
driver or your mopar race car or maybe your mopar show car it does
not matter WE WILL POST IT !
The Mopars Of The Month
Site
is an independently operated Mopar Enthusiast Internet site. Built for
Mopar Enthusiasts by Mopar Enthusiasts. Our
site and network of Mopar related sites are not affiliated with or
directly sponsored by Chrysler
Group LLC. Dodge, Chrysler, Jeep, Plymouth and Mopar are all trademarks of
Chrysler Group LLC and are used only for descriptive
purposes.
